Refrigerant Piping & Leak Detection Monitoring

$399.99

Expert Installation That Ensures Your HVAC System Runs Efficiently for Years

Improperly installed refrigerant lines are one of the most common sources of premature HVAC failure, wasted energy, and voided warranties. Get a Reno's professional refrigerant piping installer services are specifically designed to protect your investment from day one-delivering precision brazing, rigorous testing, and code-compliant routing that keeps your system running at peak efficiency for 15 to 20 years. When installation is done right, you avoid the serious damage that leads to compressor replacement, refrigerant loss, and unexpected repair costs.

Why You'll Love Working With Get a Reno's Professional Installers

Warranty Protection – Improper refrigerant line installation can void warranties. Get a Reno's installers follow manufacturer specifications and local building codes precisely, so your coverage stays intact and your equipment investment is secure.
System Longevity – Expert techniques—proper brazing, deep vacuum testing, and correct line sizing—deliver a 15–20-year system lifespan. Amateur installations commonly fail in just 5–8 years due to moisture damage, leaks, and corrosion.
Energy Efficiency – Correct sizing and routing of refrigerant lines reduce energy costs by up to 30%. Quality installations result in energy savings of 18% to 36% for air conditioners and heat pumps compared to poorly installed units.
Leak Prevention – Professional brazing with nitrogen purge and thorough pressure testing eliminates the smallest leaks before your system ever runs. Leak detection and troubleshooting skills are vital for identifying leaks and operational issues-our team catches problems before they cost you money.
Code Compliance – Every Get a Reno installation meets all applicable mechanical codes and safety standards, including requirements for pipe materials, identification labeling, stop valves, and ventilation. Knowledge of ASHRAE standards and EPA regulations is essential for HVAC/R professionals, and our installers maintain full compliance at every step.

What Makes Professional Installation Different

Most homeowners don't realize how much can go wrong when refrigerant piping is handled by untrained contractors or attempted as a DIY project. Refrigerant lines can exceed pressures of 400 PSI, and proper installation also matter because leaks can be hard to detect and may require advanced leak detector technology.

Get a Reno's refrigerant piping installer service is built differently:

Nitrogen Purge Brazing – Brazing operations require strict atmospheric control to prevent contamination. Brazing without nitrogen can create harmful cupric oxide scale inside your pipes, which degrades heat transfer, damages compressor internals, and shortens system life. Our installers maintain a continuous flow of dry nitrogen during every braze joint. Brazing skills are important for joining copper and metal piping, and every Get a Reno technician is trained to produce clean, strong joints. Even with clean brazing, the smallest leaks may still require specialized tools such as ultrasonic leak detectors or a detector with a broad refrigerant range.
Proper Line Sizing – Oversized lines slow oil return to the compressor; undersized lines increase pressure drop and force the equipment to work harder. Refrigerant lines must be sloped 1/8 inch per foot for oil return, and suction line risers above 10 feet require P-traps. Our installers calculate diameter, length, and routing to ensure correct refrigerant flow and protect your compressor from liquid slugging and oil logging.
Deep Vacuum Testing – A deep vacuum below 500 microns is critical for system longevity. Evacuating the system is essential for removing air and moisture before charging. Moisture left inside refrigerant lines leads to acid formation and corrosion that destroys compressor components from the inside. Get a Reno pulls multiple vacuum stages to guarantee your system is moisture-free. Professional verification may also use advanced monitor systems; the H25-IR PRO detects over 40 refrigerant gases. Some professional monitors such as Chillgard 5000 detect leaks as low as 1 ppm, and the Multi-Zone Gas Monitor has an industry-leading MDL of 1 ppm.
Above-Ground Routing – Underground installation voids manufacturer warranty. Compressor failure is almost inevitable with buried lines because corrosion from soil can lead to significant repair costs, and underground lines make service access difficult and expensive. Get a Reno routes all refrigerant piping above ground with proper mechanical protection, shielding, and support fasteners at regular intervals. In monitored refrigerant spaces, equipment such as the MGS-550 Dual Gas Detector helps meet ASHRAE 15 and EN 378 requirements.

How Our Installation Process Works to Detect Leaks

Site Assessment and Planning Every project starts with a thorough evaluation. Our installers assess equipment tonnage, line lengths, elevation differences, and routing paths to avoid obstructions and hard to reach areas. The ability to interpret complex mechanical blueprints is crucial for HVAC/R work, and our team reviews your mechanical plans to determine optimal line sizing and placement. Material selection must be rated for the operating pressures of the refrigerant used-we match every component to your specific system requirements.
Professional Installation Get a Reno's technicians execute precise bending and routing to minimize pressure drop, then braze all joints with a continuous nitrogen purge to prevent internal oxidation. Pipes are secured with appropriate hangers and shield plates where they pass near structural edges. Physical stamina is necessary for working in confined spaces and lifting heavy materials-our crews are equipped and conditioned for the demands of residential and commercial piping runs. PPE like safety glasses and gloves is necessary when handling high-pressure refrigerants, and safety is never compromised on a Get a Reno job site. Refrigerants can displace oxygen and may create hazardous conditions in confined spaces, so our teams follow strict ventilation protocols and monitor those areas for the presence of refrigerant and other hazards.
Testing and Commissioning After installation, we pressure test using nitrogen-a nonflammable inert gas-holding the high side at approximately 600 psig and the low side at approximately 215 psig for a minimum hold period; this testing helps detect leaks and confirm whether any refrigerant is present where it should not be. Where required, a leak detection system or refrigerant monitor may also be used as part of code and safety verification. Pressure testing of refrigerant piping must use nonflammable inert gases like nitrogen. Once the pressure test passes, we pull a deep vacuum to below 500 microns, verify the reading holds, then charge the system per manufacturer specifications. Closed-cell foam insulation is applied to all suction lines to prevent condensation and heat gain. Documenting installation parameters is crucial for future maintenance and inspections-Get a Reno provides complete documentation of every test result, material used, and commissioning reading. The X30 Refrigerant Monitor is one example of technology that simplifies compliance with refrigeration safety codes. A final inspection confirms the entire installation meets Get a Reno's quality standards and all applicable codes.

Service Details and Leak Detection System Options

Coverage: Residential and commercial HVAC systems up to 5 tons
Materials: Type L copper refrigerant lines with closed-cell insulation, rated for your system's operating pressures
Testing: Pressure testing (nitrogen), deep vacuum to below 500 microns, and complete leak detection before charging
Insulation: Closed-cell foam on all suction lines; thermal protection on exposed lines
Warranty: 2-year labor warranty on all installation work
Included: Pressure testing, vacuum testing, insulation, system commissioning, and full documentation package
Compliance: All work meets applicable mechanical codes, ASHRAE standards, and EPA Section 608 requirements. Section 608 certification from the EPA is legally required to handle refrigerants in the US-every Get a Reno technician holds active certification. Many states require a specialized mechanical, plumbing, or HVAC/R contractor license, and Get a Reno maintains all required licensing.
Service Areas: Call (929) 294-7360 for availability in your area

Who Needs Professional Refrigerant Lines and Piping Installation

Ideal for:

Homeowners installing new HVAC systems – Protect your house and your investment with installation that maintains warranty coverage and maximizes efficiency
Property managers replacing aging equipment – Replace failing units with confidence that new refrigerant lines will support the full rated lifespan of your equipment
Contractors requiring certified installation partners – Get a Reno works alongside your team to provide specialized piping expertise, specialized tools, and code-compliant execution
Anyone upgrading to modern refrigerant systems – Newer A2L refrigerants carry stricter piping requirements for ventilation, identification, and protective shielding-Get a Reno stays current with evolving code changes
Commercial facility managers – Industrial applications and commercial units demand precision installation to control operating costs and maintain continuous monitoring of system performance

Whether you're building new, retrofitting existing equipment, or need to replace corroded or leaking refrigerant lines, Get a Reno delivers the same rigorous process every time. Installation of refrigerant piping requires careful planning and adherence to safety rules-there's good reason to trust professionals who do this work every day. Completion of an HVAC/R apprenticeship program is standard practice for our technicians, and familiarity with mechanical and refrigeration codes is important for compliance during installations. Liquid refrigerant can condense in improperly installed lines, leading to compressor damage and costly failures-our team eliminates that risk.

Frequently Asked Questions About Water Leak Detection

How long does installation typically take? Most residential installations complete in 1–2 days, depending on line length, routing complexity, and system size. This includes site preparation, brazing, pressure testing, vacuum pulling, insulation, and commissioning. Most employers require at least a high school diploma for vocational training, and Get a Reno's technicians hold industry certifications well beyond minimum requirements.

Do you handle permits and inspections? Yes. Get a Reno manages all permitting and inspection coordination. Local building departments typically require permits for major HVAC installations, and inspectors verify piping materials, joint quality, support, insulation, and labeling. We ensure everything passes on the first visit.

What happens if there's a problem after installation? Our 2-year labor warranty covers any installation-related issues, including brazed joint failures and refrigerant leaks. Moisture damage can create acids that destroy compressor components-if an installation defect causes any such issue within the warranty period, Get a Reno makes it right at no additional cost. Contact us at support@getareno.com for warranty service.

Can you work with my existing HVAC contractor? Absolutely. We coordinate with your preferred contractor or provide complete installation as a standalone service. Get a Reno's refrigerant piping installer team integrates seamlessly with general contractors and HVAC equipment suppliers.

Why shouldn't I install refrigerant lines myself? Activities involving refrigerant circuits generally require EPA Section 608 certification-it is legally required to handle refrigerants in the US. Beyond legal requirements, the risk of moisture contamination, improper joints, incorrect line sizing, and code violations makes professional installation essential. The peace of mind from knowing your system is properly installed, tested, and warranted far outweighs any upfront cost difference.

Ready for Professional Installation?

Stop risking system failure, voided warranties, and inflated energy bills with improper installation. Choose Get a Reno's certified refrigerant piping installers for reliable, efficient performance backed by a 2-year labor warranty.

Call (929) 294-7360 for a free consultation and quote.

Visit www.getareno.com for more HVAC installation services, or email support@getareno.com with any questions.

Licensed. Insured. Warranty-backed. Every installation, every time.