Chiller Plant Structural Retrofits

$399.99

Modernize Your Chiller System for 30-50% Energy Savings, Energy Efficiency, and Peak Performance

A chiller plant retrofit contractor modernizes an existing cooling system to cut energy use and operating costs—often by 30-50%—without the capital expense of full replacement. Get a Reno transforms outdated chiller plants to address the reliability and performance problems common in aging or underperforming systems, upgrading the components that matter most: compressors, controls, variable frequency drives, and heat exchangers.

For commercial building owners with aging chiller systems, industrial facility managers dealing with downtime and reliability issues, and property developers pursuing sustainable, cost-effective upgrades, choosing a retrofit contractor requires specialized engineer-led expertise. Get a Reno's team of experienced technicians and engineers delivers phased, engineered solutions that measurably reduce your kW/ton from the 1.0-1.5 range common in older plants down to 0.5-0.8 kW/ton—the benchmark for modern, efficient chiller systems. Below, you'll see how Get a Reno approaches chiller plant retrofits, what services are included, how the process works, what savings to expect, and what to look for when comparing contractors. The result is lower energy bills, longer equipment life, minimal disruption during upgrades, and a higher-quality facility that meets current energy efficiency standards and sustainability goals.

Why You'll Love Get a Reno's Industrial Chillers Retrofit Services

Dramatic Energy Cost Reduction – Cut cooling expenses by 30-50% through modern efficiency upgrades. Chiller systems can achieve significant cost savings through optimization of controls, staging, and component upgrades. Retrofitting can lead to significant energy savings over time, with controls-only projects paying back in as little as 1-2 years.
Extended System Lifespan – Chiller retrofitting can extend the lifespan of existing systems by 15-20 years. Rather than replacing your entire plant, Get a Reno targets the components driving inefficiency-saving your capital budget while preserving the infrastructure you've already invested in.
Minimal Operational Disruption – Phasing and continuity of cooling plans are critical to minimize operational disruptions during retrofits. Get a Reno's phased retrofit approach keeps your facility running while upgrades happen in planned stages, maintaining operations and cooling continuity throughout the project. It's crucial to maintain temporary cooling if the facility will remain operational during retrofit, and our team plans for this from day one.
Enhanced Reliability – Upgrading chillers can enhance system reliability and performance. Modern components like magnetic-bearing compressors, VFD-driven pumps, and digital controls dramatically reduce breakdowns, emergency repairs, and unplanned downtime that kills productivity.
Compliance Assurance – Modernized chillers can meet current energy efficiency standards. From refrigerant phaseout regulations to building energy codes and current industry standards, Get a Reno ensures your upgraded system meets all current environmental and compliance requirements.

What Makes Get a Reno Different

Most contractors focus on selling complete chiller replacements-expensive projects with long lead times, major disruption, and capital costs that strain budgets. Get a Reno takes a smarter approach. We allocate the right resources to each retrofit project to keep delivery efficient and focused.

Get a Reno is built on a retrofit-first philosophy:

Retrofit-First Philosophy – Upgrading existing infrastructure saves 40-60% compared to full replacement. Get a Reno's team evaluates what's working, what's degraded, and what delivers the highest return when upgraded. This targeted approach puts your budget where it produces the greatest efficiency gains.
Comprehensive System Analysis – Energy modeling and design-build approaches assist in calculating projected efficiencies. Get a Reno performs advanced diagnostics and performance testing that most contractors skip-load profiling, kW/ton measurement, heat exchanger inspection, and refrigerant system evaluation-so every recommendation is backed by real data, not guesswork. Measurable performance criteria must be established for energy savings post-retrofit.
Proven Track Record – Evaluating relevant experience necessitates proof of completed projects in chiller systems. Get a Reno's portfolio spans commercial and industrial applications, from office towers and hospitals to manufacturing facilities. Our clients see verified energy reductions that match our projections and support customer expectations because we model real load curves before we design a single upgrade.

How Get a Reno's Retrofit Process Works

Step 1 – Comprehensive System Assessment Get a Reno's engineers conduct a detailed evaluation of your current chiller plant. We measure existing COP and kW/ton performance, inspect mechanical wear on compressors and heat exchangers, assess piping and cooling tower conditions, and profile your actual cooling load. Contractors should follow a rigorous startup and commissioning process for chiller systems, and that process begins with knowing exactly where your system stands today. This also shows how industrial chillers work in process cooling by removing heat to maintain stable equipment temperatures. Chiller systems require regular performance testing for optimal operation, and this assessment establishes a clear baseline.
Step 2 – Custom Retrofit Design Based on diagnostic data, our team designs a customized retrofit plan tailored to your facility's specific cooling needs, operating schedule, budget, and specific application. We determine which upgrades-VFD installations, compressor replacements, controls integration, heat exchanger modifications-deliver the greatest return. Proposals should include itemized scopes covering all bid aspects like rigging and electrical upgrades. Lifecycle costs must be transparent and include potential utility rebates for projects, and Get a Reno ensures you see the full financial picture before any work begins.
Step 3 – Phased Implementation Get a Reno installs your retrofit in carefully planned phases. It's essential to have a documented risk mitigation plan for downtime management during projects-our team creates one for every job. Commissioning should verify that systems operate according to owner requirements, and we conduct thorough performance verification at each phase to confirm your system is delivering the expected results, with remote access for ongoing monitoring and control after implementation.

Service Details and Temperature Control

Retrofit Types: Controls upgrades and Building Automation System integration, compressor replacements (including magnetic-bearing conversions), heat exchanger retubing and modifications, VFD installations for pumps and cooling tower fans, refrigerant system upgrades, and hydronic balancing. A chiller retrofit demands integration with the Building Automation System for optimal performance.
System Capacity: Contractors should handle projects ranging from 300 tons to over 2000 tons in capacity. Get a Reno services commercial and industrial chiller plants across a wide range of applications. Air-cooled chillers range from 10 tons to 420 tons, while water-cooled chillers can reach temperatures as low as -21°F. Ultra low temperature chillers can operate at -40°F. Project delivery depends on close coordination with manufacturers and suppliers.
Temperature Control: Industrial chillers maintain temperature control of +/- 1°F, and Get a Reno's retrofits preserve or improve this precision. Water-cooled chillers operate at lower temperatures for efficiency, while air-cooled chillers can perform better in freezing temperatures.
Equipment Support: Industrial chillers support 1-100+ pieces of equipment. Our retrofits ensure your upgraded system continues to cool every piece of connected equipment reliably.
Service Areas: New York metropolitan area and surrounding regions
Project Timeline: 2-8 weeks depending on retrofit scope and complexity
Warranty Coverage: Warranties should separately include manufacturer equipment and contractor workmanship. Get a Reno provides a comprehensive 3-year warranty covering all retrofit components and labor. Chiller services include installation, maintenance, and repairs throughout the warranty period.
Credentials: Verifying credentials includes checking for valid mechanical/HVAC contractor licenses. Get a Reno's technicians hold all required licenses, and qualified contractors should have certifications like EPA Universal because they understand safe refrigerant handling and retrofit requirements. A comprehensive safety plan with OSHA compliance records is essential for contractors, and Get a Reno maintains exemplary safety records. Safety records include the contractor's EMR rating to assess safety program effectiveness.
Contact: Call (929) 294-7360 or email support@getareno.com for a free consultation

Who Get a Reno's Retrofit Services Are For

Ideal for:

Commercial building owners with 10+ year old chiller systems experiencing high energy costs and declining performance. Contractors must demonstrate experience with existing infrastructure and tenant operations-Get a Reno understands how to manage retrofits in occupied buildings.
Industrial facility managers facing frequent breakdowns, rising maintenance costs, and aging hvac equipment that can no longer deliver reliable temperature control for industrial chiller applications.
Property developers seeking sustainable upgrades to meet LEED certification, green building goals, or corporate sustainability goals-without the capital expense of full chiller replacement services. Chiller replacement services modernize existing cooling systems, but retrofits often achieve similar results at a fraction of the cost.

If you want improved energy efficiency, extended system life, and reliable performance from your existing chiller infrastructure, Get a Reno's retrofit services fit your needs. Selecting contractors should focus on technical expertise beyond just pricing-and that's exactly what Get a Reno delivers. The contractor's financial stability and safety records should be verified during selection processes, and Get a Reno welcomes this scrutiny. References from past clients who completed recent chiller projects are crucial for assessment, and we're happy to connect prospective clients with our references.

Frequently Asked Questions

How much can I save with a chiller plant retrofit? Typical energy savings range from 30-50%, depending on your current system's condition and the scope of upgrades. Controls-only retrofits often pay back in 1-2 years, while comprehensive retrofits involving compressor and equipment upgrades typically achieve payback in 3-5 years. Get a Reno establishes measurable performance criteria before work begins so you can track real savings. Contact us at (929) 294-7360 for a detailed assessment of your facility's savings potential.

Will my facility operations be disrupted during retrofit? Get a Reno uses phased installation specifically designed to minimize downtime-typically only 1-2 days per phase. We maintain temporary cooling throughout the process so your operations, tenants, and critical systems are never compromised. Every project includes a documented risk mitigation plan for downtime management.

What types of chillers and systems can be retrofitted? Get a Reno works with both air cooled chillers and water cooled systems across commercial and industrial applications. Whether your facility runs centrifugal, screw, or reciprocating chillers, our team has the knowledge and expertise to design and implement the right retrofit solution. We also evaluate how low pressure liquid moves through the refrigerant cycle during retrofit planning.

What if the retrofit doesn't meet performance expectations? Get a Reno provides a comprehensive warranty and performance guarantee. Our commissioning process verifies that systems operate according to owner requirements, and we stand behind our work. If results don't meet the measurable performance criteria we established together, we make it right.

How do I know if my system needs a retrofit or full replacement? During our comprehensive system assessment, Get a Reno's engineers evaluate the condition of your existing equipment-shells, heat exchangers, compressors, and controls. If your infrastructure is structurally sound but operating inefficiently, a retrofit is almost always the smarter investment. We'll give you an honest recommendation based on data and a clear understand of your facility's operating needs, not a sales agenda.

Ready to Upgrade Your Chiller Plant?

Stop wasting money on an inefficient chiller system that drives up energy bills and disrupts operations with unpredictable breakdowns. Get a Reno's proven retrofit solutions deliver 30-50% energy savings, extended equipment life, and the reliable performance your facility demands.

Choose Get a Reno and discover what a properly optimized chiller plant can do for your bottom line and your peace of mind.

Call (929) 294-7360 | Email support@getareno.com | Visit www.getareno.com

Free consultation. Expert assessment. Satisfaction guaranteed.